Stationary Rapid deployment Solutions

RAPID TOWER ON TRIPOD MODEL No. RDUT

1. On a Tripod

2. Partial mobility

3. Deployment within 3 Days

4. Cost effective rapid solution

5. Tower capacity as same as COW

* Installed on Tripod(3 guy arms)& 4 concrete blocks.
* Each block could be transportable by a Hiab/Boom Truck.
* No excavation required.
* Total concrete volume is 6 CBM approx.
* Re deployment with concrete is possible.

RAPID DEPLOYMENT TOWER ON TRIPOD Rapid tower only
Stability	4Nos. Precast concrete blocks are required for stability.
Tower Height	60m	50m	40m	30m	25m
Model No.	RDUT6010	RDUT5010	RDUT4010	RDUT3010	RDUT2510
Antennae configuration	2x1.2m mw dishes 6 GSM Panel antennae
Tower type	Lattice type Fully galvanized Painted as per customer preference
Standards	Quality Management system-ISO 9001-2008 Steel Fabrication—BS5950-1:2000 Hot Dipped Galvenization---BS EN ISO 1461:2009 Material ---St 52.3 & St 44.2 Wind Loading—BS8100-4:1995 Strength Assessment: BS 8100-3:1999
Operation	Operated by 3 phase winch. Optional hand wheels provided for 40m or smaller.
Wind speed	120, 160 and 180 km/hr
Accessories provided with the tower	Antennae brackets for GSM and microwave antennae Guy wires and tightening clamps Guide arms with Jacks Fuel tanks Sand shoes Cable reels
Shelter and generator	As per client’s details

RAPID DEPLOYMENT TOWER ON CONCRETE BOLCKS WITHOUT GUIDE ARMS

RAPID DEPLOYMENT TOWER

ON PRECAST CONCRETE

MODEL No. RDUC

1. Installed on 7 concrete blocks.

2. They are not connected together. (independent)

3. 3 pairs bolted together on guy points and single slab in the middle. 1500x1500x420mm each.

4. Centre block is 1500x1500x420mm

5. Total concrete volume 6.5 CBM

6. Cost effective

7. Partially mobile.

RAPID DEPLOYMENT TOWER ON TRIPOD Rapid tower only
Stability	4Nos. Precast concrete blocks are required for stability.
Tower Height	60m	50m	40m	30m	25m
Model No.	RDUC6010	RDUC5010	RDUC4010	RDUC3010	RDUC2510
Antennae configuration	2x1.2m mw dishes 6 GSM Panel antennae
Tower type	Lattice type Fully galvanized Painted as per customer preference
Standards	Quality Management system-ISO 9001-2008 Steel Fabrication—BS5950-1:2000 Hot Dipped Galvenization---BS EN ISO 1461:2009 Material ---St 52.3 & St 44.2 Wind Loading—BS8100-4:1995 Strength Assessment: BS 8100-3:1999
Operation	Operated by 3 phase winch. Optional hand wheels provided for 40m or smaller.
Wind speed	120, 160 and 180 km/hr
Accessories provided with the tower	Antennae brackets for GSM and microwave antennae Guy wires and tightening clamps
Shelter and generator	As per client’s details

Last Updated ( Saturday, 06 August 2011 13:48 )